September 2, 2001

Today I made another socket holder out of old plywood. I also exchanged the crappy inline air regulator for a better one, and installed it. Here you can see the T adapter. The line going to the left is the roaming 50' hose. The line going up to the right is the over-the-ceiling jig hose.

I secured the air lines all over the place so they're no longer in a pile on the floor. One hose from the T goes into the regulator and then has 50' free to roam about. This will be used for priming, bench work, etc. The other line goes up the wall, across the ceiling, and down the far side of the jig. The yellow coiled air hose attaches there for use on the jig. No more hoses sprawled out all over the floor...

I also built a second, shorter and smaller workbench for the other side of the shop (picture coming soon).

Dammit...where's my tool kit?

Next   |   Previous   |   Home

Dan Checkoway ()